Dielectric Coatings

Properly applying dielectrics in electric vehicle (EV) batteries mitigates thermal propagation.

Discover Solutions for Dielectric Coating Applications

These products are a representation of possible options for your finished system. Your solution is configured for your specific needs.

Related Materials

Parker LORD Sipiol UV

Sipiol UV was developed specifically for electric vehicle (EV) battery applications. It cures in seconds with UV light, and is electrically insulative.

PPG CoraChar SE 4000

PPG CoraChar SE 4000 intumescent fire protective coating shields electric vehicle (EV) battery packs and electrical energy components from external fires and internal thermal runaway events.

Sika Sikagard-834

Sikagard 834 epoxy-based intumescent fire protection coating protects electric vehicle (EV) batteries from thermal events.

Tflex CR607

At 6.4 W/m-K thermal conductivity, Tflex™ CR607 is at the forefront of thermal performance for a two-part, cure in place dispensable gap filler.

VM 1802

LG Chem VM 1802, a two-component thermal material for EV Battery and Electronics heat transfer applications.

Liqui-Form 3500 (LF3500)

Henkel - BERGQUIST® LIQUI-FORM 3500 is a high conductivity gel thermal interface material designed for demanding applications that require a balance between dispensability and low component stress during assembly.

HB Fuller EV Protect 4006

EV Protect 4006 is a two-component flame retardant, low-density polyurethane foam designed for potting and encapsulation of cylindrical cells in EV battery modules.

HB Fuller EV Seal 500

Learn more about EV SEAL 500, an easy to apply, fast setting, and resealable gasket material used in automotive and EV battery applications.

LORD CoolTherm SC-1200

Since CoolTherm® SC 1200 thermally conductive silicone gap filler is highly abrasive, Parker LORD® asked Graco to find out how to dispense one million shots of the two component material without equipment failure.

LORD CoolTherm TC-2002

CoolTherm® TC-2002 adhesive is a two-component adhesive system designed for use in structural bonding applications which require thermal conductivity with high bond strength.

Dow SYLGARD 170

SYLGARD™ 170 fast cure silicone elastomer is a two-part general purpose encapsulant with low viscosity, good flow ability, and flame resistance that cures fast at room temperature.

Dowsil EF-6525 RTV silicone foam

DOWSIL™ EF-6525 RTV low viscosity silicone foam is a two-component low-density liquid elastomer that cures into a foamed elastomer.

Contact an EV Battery Expert

Please enter a value
Please enter a value
Please enter a value
Please select
Please enter a value
Please enter a value

Do You Have Product Questions?

Technical Support

Technical Support

+32 89 770 847

Monday - Friday
8:30 - 17:00 CET

General Support

General Support

+32 89 770 865

Monday - Friday
8:30 - 17:00 CET

Graco