THERM-A-GAP TC50

High-performance Dispensable Thermal Putty | Parker Chomerics

Parker Chomerics

THERM-A-GAP TC50

PRODUCT DESCRIPTION:

The Parker Chomerics THERM-A-GAP™ TC50 is a high performance, one component, dispensable thermal compound developed to conduct heat between a hot component and a heat sink or enclosure. 

PRODUCT CHARACTERISTICS:

Color: Gray

Operating Temperature: -67  to 392 °F  (-55 to 200 °C)

Thermal Conductivity (W/mk): 5.0 

Flow Rate (grams/min @90 psi): 10g

Density: 3.25

Volume Resistivity (ohm-cm): 10"

Outgassing (%TML / %CVCM by mass): 0.07%

Recommended Uses:

  • Automotive Electronic Control Units
  • Power Supplies and Semiconductors
  • Memory and Power Modules
  • Microprocessors
  • Consumer Electronics

For complete product information, please refer to ph.parker.com

 

graco system solution:

 

UNIXACT C300 AUTOMATION TABLE:

  • Work Envelope: (X-Y-Z): 254 mm x 277 mm x 70 mm (10 in x 11 in x 2.75 in) 
  • Approximate Overall Dimensions: 1905 mm x 939 mm x 1041 mm (75 in x 37 in x 41 in) 
  • Drive Method: Ball screw drives with linear guide bearings
  • Drive System: Servo drive motors for X, Y, Z, and theta (dispense)
  • Accuracy: +/- 0.1 mm/300 mm (+/- 0.004 in/12 in)
  • Position Repeatability: 0.01 mm (0.0004 in)
  • Dispense Speed: 100 mm/s (4 in/s)

PROGRESSIVE CAVITY PUMP:

  • Consists of a rotor and stator that create sealed cavities for the material to flow through. 
  • With high accuracy and repeatability, Graco's Progressive Cavity Pump is well-suited for abrasive materials
  • Continuous, volumetric dispense with high repeatability
  • Wide range of adjustable flow rates
  • Wear-resistant and low maintenance
  • Available in several volumes for application flexibility

DYNAMITE 22 SUPPLY SYSTEM:

  • The ideal solution for delivering precise and consistent material feed from small containers ranging from 300cc cartridges to 1 gallon pails
  • Extensive product lifecycle even for heavy duty applications using highly viscous and abrasive materials
  • With a minimum weight of 28kg, the mini extruders are suitably designed to reduce space and allowing great flexibility
  • Simple and user-friendly designed control panel

For complete product information, please refer to ph.parker.com

Download the spec sheet

All trademarks and registered trademarks are the property of their respective owners.

Contact an Expert

Please enter a value
Please enter a value
Please select
Your email address is required
Please enter a value
Please enter a value
Please enter a value

Recommended Products

For applying THERM-A-GAP TC50

Have Questions? Let's Talk.

Call Support

Call Support

Monday–Friday
7 a.m.–4 p.m. Central Time

Email Support

Email Support

Contact an Expert

Contact an Expert

We'll help you choose the right product for your use.

Graco