Thermal Management (Gap Filler)

Thermal management safely dissipates excessive heat away from a part, so that it functions properly and does not combust. In electric vehicles, this usually involves surrounding or encapsulating battery packs or modules in gap filler.

Choose Elite construction for applications of highly abrasive thermal interface materials (TIMs), silicones, urethanes, and epoxies. When your system configuration includes pumps and valves with Elite construction, you can expect to…

  • dispense at least 50,000 gallons (200,000 liters) before noticing any wear on pump pistons and cylinders*
  • get at least 10 times more equipment life, compared to standard systems* 

How do we know? Read the research.

* Results may vary. Variables affecting component life include, but are not limited to, material chemistry/fillers, flow rate, cycle rate, maintenance diligence, and system pressure.

Discover Solutions for Thermal Management

These products are a representation of possible options for your finished system. Your solution is configured for your specific application needs.

Dispensing Systems

Related Materials

Liqui-Form 3500 (LF3500)

Henkel - BERGQUIST® LIQUI-FORM 3500 is a high conductivity gel thermal interface material designed for demanding applications that require a balance between dispensability and low component stress during assembly.

VM 1802

LG Chem VM 1802, a two-component thermal material for EV Battery and Electronics heat transfer applications.

LORD CoolTherm SC-1200

Since CoolTherm® SC 1200 thermally conductive silicone gap filler is highly abrasive, Parker LORD® asked Graco to find out how to dispense one million shots of the two component material without equipment failure.

PPG CoraChar SE 4000

PPG CoraChar SE 4000 intumescent fire protective coating shields electric vehicle (EV) battery packs and electrical energy components from external fires and internal thermal runaway events.

Parker LORD Sipiol UV

Sipiol UV was developed specifically for electric vehicle (EV) battery applications. It cures in seconds with UV light, and is electrically insulative.

Sika Sikagard-834

Sikagard 834 epoxy-based intumescent fire protection coating protects electric vehicle (EV) batteries from thermal events.

Tflex CR607

At 6.4 W/m-K thermal conductivity, Tflex™ CR607 is at the forefront of thermal performance for a two-part, cure in place dispensable gap filler.

HB Fuller EV Protect 4006

EV Protect 4006 is a two-component flame retardant, low-density polyurethane foam designed for potting and encapsulation of cylindrical cells in EV battery modules.

HB Fuller EV Seal 500

Learn more about EV SEAL 500, an easy to apply, fast setting, and resealable gasket material used in automotive and EV battery applications.

LORD CoolTherm TC-2002

Parker Lord CoolTherm® TC-2002 adhesive is a two-component adhesive system designed for use in structural bonding applications which require thermal conductivity with high bond strength.

Dow SYLGARD 170

SYLGARD™ 170 Fast Cure Silicone Elastomer is a two-part general purpose encapsulant with low viscosity, good flow ability, and flame resistance that cures fast at room temperature.

Dow Dowsil EF-6525 RTV Low-Viscosity Silicone Foam

DOWSIL™ EF-6525 RTV Low Viscosity Silicone Foam is a two-component low-density liquid elastomer that cures into a foamed elastomer.

Contact Thermal Management Experts

At Graco, we have extensive experience working with highly viscous and highly abrasive materials. In partnership with major material manufacturers, we design and support systems that provide precision dispense and withstand the most demanding applications.

Please enter a value
Please enter a value
Please select
Your email address is required
Please enter a value
Please enter a value

Have Questions? Let's Talk.

Call Support

Call Support

Monday–Friday
7 a.m.–4 p.m. Central Time

Email Support

Email Support

Contact an Expert

Contact an Expert

We'll help you choose the right product for your use.

Graco